Bosch Bodenstaubsauger Beutel BSGL32400 kirschrot-metallic Bosch GL-30 2400W - Manual (Page 42)

36
Replacement parts and accessories
A Replacement filter pack
Filter type G (BBZ41FG)
For best performance: Gplus (BBZ41GPLUS)
Contents:
4 filter bags with seal
1 micro-hygiene filter
http://
www.dust-bag-bosch.com
B Textile filters (permanent filters) BBZ10TFG
Reusable bag with Velcro(R) fastener.
C Hepa filter BBZ153HF
Additional filter for cleaner exhaust air.
Recommended for allergy sufferers. Replace once a
year.
D Micro-active carbon filter BBZ192MAF
Combination of micro filter and active carbon filter.
Combats unpleasant odours. Replace twice a year.
Replace carbon filter frame with micro filter frame.
Please note! It is not possible to combine a Hepa
filter and a Micro-active carbon filter.
E Bionic filter / AirFresh System BBZ11BF
Additional filter for reducing unpleasant odours
Please replace the filter once it begins to lose its
effect (after approx. 1 year)
Reference number: 468637
F TURBO-UNIVERSAL ® brush for upholstery BBZ42TB
All in one brushing and vacuuming of upholstered
furniture, mattresses, car seats, etc. Especially suit-
able for picking up pet hair. The brush roller is dri-
ven by the suction air flow of the vacuum cleaner.
No separate electrical connection is needed.
G TURBO-UNIVERSAL ® brush for floors BBZ102TBB
All in one brushing and vacuuming of shallow pile
rugs and carpets and all hard floor coverings.
Especially suitable for picking up pet hair. The brush
roller is driven by the suction air flow of the vacuum
cleaner.
No separate electrical connection is needed.
H Hard-floor brush BBZ123HD
For vacuuming hard floors (parquet flooring, tiles,
terracotta, etc.)
Before using for the first time
Figure
Open the dust bag compartment lid (see Fig. 23).
Remove the motor protection filter from the
appliance
Place the Bionic filter / AirFresh System onto the
motor protection filter.
Push the filter into the appliance and close the
dust bag compartment lid.
1*
Figure
Push the handle onto the flexible tube and until it
engages.
Figure
Push the crevice nozzle and upholstery nozzle back
into the accessories holder as indicated.
Setting up
Figure
a)Push the flexible hose adapter into the air intake
opening on the vacuum cleaner lid until it engages.
b)To remove the flexible hose, press the two lugs
together and pull the tube out.
Figure
a)Connect the handle and the telescopic tube together.
b)Push the handle into the telescopic tube until
it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
a)Connect the floor tool and the telescopic tube
together.
b)Push the telescopic tube into the connecting piece of
the floor tool until it engages.
Press on the locking collar and pull out the
telescopic tube to disconnect.
Figure
To adjust the length of the telescopic tube, adjust
the adjusting sleeve/sliding switch in the direction of
the arrow and adjust the tube to the required length.
Figure
Holding the power cord by the plug, pull out the
required length and plug it into the mains socket.
Figure
Press the on/off button in the direction of the arrow
to switch your vacuum cleaner on/off.
Controlling the suction level
Figure
Adjust the suction by turning the on/off button in the
direction of the arrow.
The suction level can be infinitely adjusted to the level
required by turning the control knob in the direction of
the arrow.
Low power range =>
For vacuuming delicate materials, e.g. delicate
upholstery, curtains, etc.
Medium power range
=>
For daily vacuuming of lightly soiled floors.
High power range
=>
For vacuuming durable floor coverings, hard floors
and surfaces with heavy deposits of dirt.
10
9
8
7*
6*
5*
4
3*
2*