Bosch TES80359DE VeroSelection 300 Kaffeevollautomat Front Edelstahl Gehäuse hochglanz anthrazit - Manual (Page 39)

35
TES80.. | 02/2014
en
Display
The display 5 uses symbols to indicate the
selection options, coffee strength and per-
cup quantity, and uses text to indicate set-
tings, ongoing processes and messages.
The rotary knob 6 and selection buttons
4 can be used to change settings. The
selected setting is highlighted by a frame.
Espresso
ЛЛ Н
В Г А Б Е Ж
5a
5b
5c
Example:
The status line 5a shows the name of the
type of drink, along with the strength setting
55 and per-cup quantity � .
The selection line 5b shows symbols for
drink selection.
The arrows in the navigation line 5c indicate
the direction in which more menu levels can
be found.
Please refer to “Displays” for more detailed
information.
Start button
Press the start button 8 to begin drink
preparation or to start a service programme.
Press the start button 8 again during drink
preparation to stop the dispensing process
prematurely.
j button and settings
Use the j button 7 to display information
(press briefly) and adjust settings (hold
down for at least 3 seconds).
Displaying information
The following information can be displayed
in the Info menu:
● when should the next service be
completed.
● how many drinks have been dispensed
since the espresso machine was
switched on.
● Press the j button 7 briefly and navigate
with the < and > buttons 4.
Info
Descale after.
200 À
Clean after 200 À
Change filter in 200 À
*
Info
No. of coffees
11
No. of milk mixes 15
Amount hot water 2l
* appears only if the filter is activated.
Press the j button 7 briefly to return to the
drink selection. If no button is pressed for
about 10 seconds, the appliance automati-
cally switches back to drink selection mode.
Adjusting settings
See “Menu settings”.