Bosch TES80359DE VeroSelection 300 Kaffeevollautomat Front Edelstahl Gehäuse hochglanz anthrazit User Manual

Page 54

Advertising
background image

50

Robert Bosch Hausgeräte GmbH

en

Cleaning

Duration: approx. 8 minutes.

Cleaning and service
Descale

Clean

start

The

start button 8 flashes while the different

cleaning processes are running. The figures

on the top right indicate the progress of the

programme.

● Fill the water tank

11 up to the “max

mark.

● Press the

à

button

3.

Clean

start

● Press the

start button 8; the display 5 will

guide you through the programme.

Empty drip tray

Replace drip tray

● Empty the drip tray

23 and reinsert it.

Position swivel arm

● Swivel the coffee outlet

9 to the left until it

clicks into place.

Cleaning

Open powder compartment

● Open the powder compartment

18.

Insert Bosch cleaning tablet

and close drawer

● Drop a Bosch cleaning tablet into the

drawer

18 and close it.

Press start

● Press the

start button 8. The clean-

ing programme will now run for about

7 minutes.

Cleaning

Empty drip tray

Replace drip tray

● Empty the drip tray

23 and reinsert it.

The appliance is ready for use again.

Calc‘nClean

Duration: approx. 36 minutes.

Calc‘nClean combines the separate func-

tions of descaling and cleaning.

If both programmes are due to be run soon,

the espresso machine automatically

suggests this service programme.

Cleaning and service
Short rinse

milk system

Calc‘nClean

start

The

start button 8 flashes while the different

Calc‘nClean processes are running. The

figures on the top right indicate the progress

of the programme.

Important: If there is a water filter 29 in

the water tank

11, it needs to be removed

before the service programme is run.

● Press the

à

button

3.

Calc‘nClean

start

● Press the

start button 8; the display 5 will

guide you through the programme.

Empty drip tray

Replace drip tray

● Empty the drip tray

23 and reinsert it.

● Swivel the coffee outlet

9 to the right until

it clicks into place.

Place 1 l container

Place suction pipe in container

start

● Place a container with a capacity of at

least 1 l under the milk frother

10.

● Place the end of the suction pipe

10d in

the container.

● Press the

start button 8.

Cleaning

Open powder compartment

● Open the powder compartment

18.

Advertising