Bosch TCC78K751 Edelstahl Kaffeevollautomat - Manual (Page 39)

English | 41
Bosch TCC78K751 | 07/2011
Setting up the appliance
1. Deploy the appliance (see “Deployment
system”).
2. Remove the water tank (14) by pulling
it upward, rinse and i ll it with fresh cold
water. Do not i ll above the “max” mark.
14
17
3. Replace the water tank and push it i rmly
downward into place.
Fill the water tank with fresh water
every day. The tank should always
contain sufi cient water for
operating the appliance.
4. Fill the bean container (17) with coffee
beans (for preparation using pre-ground
coffee, see page 44).
5. Push the appliance back into the built-in
unit.
6. Press the power switch (2).
2
7. The appliance now heats up and rinses.
Some water will run out of the coffee
outlet. The language selection is shown
in the display:
Sprache
( Deutsch )
}
8. Press the retracted rotary knob (5) and
turn it to select the language in which
you want the display texts to appear. The
following languages can be selected:
Deutsch Português
English Dansk
Pycckий Norsk
Nederlands Suomi
Français Česky
Italiano Türkçe
Svenska Magyar
Español Ελληνικά
Polski Български
9. Press o start/stop (10). The language
you selected is saved.
You can change the language setting at
any time (see “Displaying settings”).
10. The company logo and various symbols
will i rst light up in the display, followed
by the drinks selection menu.
Coffee
I w
}
11. Set the water hardness
(see “Displaying settings”).
TCC78K751_EN.indd 41 01.07.2011 15:15:58