Alamo Machete T 7740 - Manual (Page 21)

© 2005 Alamo Group Inc. 1-15
MACHETE
Information Bulletin 010397 Continued from previous Page
TECHNICAL INFORMATION BULLETIN
No. 010397
Contact:
Alamo Industrial
Technical Services Department
1502 East Walnut
Seguin, Texas 78155
Ph; 830-372-2708 Fax; 830-372-9603
This document does not authorize the repair or replacement of parts under warranty
Figure 3
4. Weld the plate as described in figure 3
5. After welding is complete, clean weld and immeadiate area . Paint the are around the repair
and areound any area where the paint was damaged from making this repair.
1/4" fillet weld across the top
Stiffener plate 1/2" X 6" HRFB,
cut to fit as shown
Skip weld up sides
1/4" fillet weld across
bottom and sides