AT&T 950 Speakerphone - Manual (Page 8)

5.
4.
If you subscribe to caller ID services from your local
telephone service provider, you must follow the instructions in
Set home area code, (see page 11), for your phone to properly
recognize and dial calls from the call history list. You may also
need to check Set local area code (see page 12) if you want the
phone to recognize
multiple area codes.
Installation Installation
Plug the coiled handset cord into the handset jack on the left
side of the
base. Plug the other end of the coiled
cord into the handset, then hang up.
telephone
Your phone will work immediately after installation using the default
feature settings (see Default settings on page 31).
Lift the handset and listen for a dial tone. If you cannot hear a
dial tone, press VOLUME . If you still do not hear a dial tone,
see the I
section, pages 34-36, of this manual. n case of difficulty
Tabletop/desktop installation
continued from page 5
Connect the handset to the telephone.
Check for dial tone.
6