AT&T 950 Speakerphone - Manual (Page 9)

2.
1.
Installation Installation
Press on the base wedge as shown in figure a to release the
wedge. Rotate the wedge as shown in figure b so that the
larger end is toward the bottom of the telephone. Lock the
wedge by positioning it as shown in figure c and pressing,
(as shown by the arrow), it into the telephone base until it
locks in place.
Plug one end of the short line cord into the jack labeled
TEL LINE and thread the cord through the tabs under the
phone as shown.
Wall mount installation
continued on page 8
Reposition the base wedge for wall use.
Connect the short telephone line cord to the telephone.
7