Asante Technologies IC3624PWR - Manual (Page 22)

22
IntraCore IC3624PWR Layer 2 PoE Switch with Dual Gigabit
4.4 Cable Labeling and Connection Records
When planning a network installation, it is essential to label and record where each cable is connected. This helps
you locate inter-connected devices, isolate faults, and change your topology.
To manage the physical implementations of your network, follow these guidelines:
•
Label the opposing ends of each cable.
•
Draw a map of the location of all network-connected equipment using your building’s floor plans. For each piece
of equipment, identify devices on the connection.
•
Note the length of each cable and the maximum cable length supported by the switch ports.
•
Use a location-based key when assigning prefixes to your cable labeling.
•
Use sequential numbers for cables that originate from the same equipment.
•
Name racks to help differentiate between them.
•
Label each piece of equipment.
•
Display a copy of your equipment map, including keys to all abbreviations, at each equipment rack.