Before using for the first time, Setting up, Vacuuming – Bosch Aspiradores de trineo BGL452132 Maxxx 2100W hepa parquet EAN 4242002690698 User Manual

Page 39

Advertising
background image

38

en

Congratulations on your purchase of a Bosch BGL45
vacuum cleaner.
This instruction manual describes various BGL45 models,
which means that some of the equipment features and
functions described may not be available on your model.
You should only use original Bosch accessories, which
have been specially developed for your vacuum cleaner to
achieve the best possible vacuuming results.

Fold out picture pages.

Before using for the first time

Figure

Push the handle onto the flexible hose until it engages.

Setting up

Figure
a)
Push the flexible hose adapter into the opening on the

vacuum cleaner until it engages.

b To remove the flexible hose, press the release button and

pull the hose out.

Figure
a)
Connect the handle and the telescopic tube together.
b) Push the handle into the telescopic tube until it engages.

To release the connection, squeeze the locking collar and
pull the telescopic tube out.

Figure
a)
Connect the floor tool and the telescopic tube together.
b) Push the telescopic tube straight into the

connecting piece of the floor tool until it
engages.
To release the connection, squeeze the locking collar
and pull the telescopic tube out.

Figure

To adjust the length of the telescopic tube, adjust the
adjusting sleeve/sliding switch in the direction of the
arrow and adjust the tube to the required length.

Figure

Attach the accessories holder to the multi-purpose
nozzle and clip it onto the suction pipe/telescopic tube.

6*

5*

4*

3*

2

1*

Figure

Take the mains plug, pull the mains cable to the required
length and insert the plug into a socket.

Figure

Press the ON/OFF button in the direction of the arrow to
switch your vacuum cleaner on.

Vacuuming

Figure

The required suction power can be selected infinitely
variably by adjusting the slide control.

Ⅲ Lowest

suction range:
For vacuuming delicate fabrics,
e.g. curtains.

Ⅲ Low

suction range:
For daily vacuuming of lightly soiled floors.

Ⅲ Medium

suction range:
For vacuuming durable floor coverings, hard floors and
for heavily soiled surfaces.

Ⅲ High

suction range:
For vacuuming stubborn dirt and very heavily soiled
surfaces.

Figure

Adjusting the floor tool:
a) For vacuuming rugs

and carpets

=>

b For vacuuming

hard floors

=>

Caution!
Floor tools are subject to a certain amount of wear,
depending on the type of hard floors you have
(e.g. rough, rustic tiles). Therefore, you must check
the underside of the floor tool at regular intervals.
Worn undersides of floor tools may have sharp edges
that can damage sensitive hard floors, such as parquet
or linoleum. The manufacturer does not accept any
responsibility for damage caused by worn floor tools.

Turbo brush
If your vacuum cleaner is equipped with a turbo brush,
please consult the accompanying instruction manual for
notes on its use and maintenance.

Figure

Vacuuming with accessories

Attach the nozzles to the tube or handle as required:

a) Crevice nozzle for vacuuming crevices and corners, etc.
b) Upholstery nozzle for vacuuming upholstered furniture,

curtains, etc.

11*

10

9

8

7

Advertising