Altinex DA1222AT - Manual (Page 4)

DISTRIBUTION AMPLIFIERS
3
•
Any changes or modifications to the unit not
expressly approved by Altinex, Inc. could void
the user’s authority to operate the equipment.
ABOUT YOUR DISTRIBUTION AMPLIFIER 2
The DA1222AT is a 1-in 2-out RGBHV high-
resolution video distribution amplifier. It allows the
connection of a single video source from a
computer or interface to one or two monitors or
projectors capable of handling the source
resolution and scan frequency.
The DA1222AT offers a minimum bandwidth of
350 MHz and a typical bandwidth of 500 MHz,
allowing it to remain virtually transparent to high-
resolution signals.
Though primarily designed to pass an RGBHV
signal format, the DA1222AT can also pass
RGBS, RGsB, Component Video (Y, R-Y, B-Y), S-
Video (Y/C), and Composite Video by using the
appropriate channels.
The DA1222AT uses an internal 110/220 V
switchable power supply. It can be rack-mounted
using optional hardware.
The DA1222AT uses 5-BNC connectors for each
input and output representing red, green, blue,
horizontal sync, and vertical sync signals.
TECHNICAL SPECIFICATIONS 3
FEATURES/DESCRIPTION DA1222AT
GENERAL
No. of Inputs
1
Input Connector Set of 5-BNC Female
No. of Outputs 2
Output Connectors Two sets of 5-BNC
Female
Compatibility High resolution
RGBHV, RGBS, RGsB
and RsGsBs,
Component, S-Video
and Composite Video
(VGA, SVGA, XGA,
UXGA signals)
Table 1. DA1222AT General
MECHANICAL DA1222AT
Material 0.1” Al
Finish Gray
Front/Back Panels Lexan
Height (inches) 1.75in (44mm)
Width (inches) 8.50in (216mm)
Depth (inches) 4.50in (114mm)
Weight (pounds) 2.0lbs (0.91kg)
Ship Weight (pounds) 3.2lbs (1.45kg)
T
°
Operating 10
°
C-35
°
C
T
°
Maximum 50
°
C
Humidity 90
%
non-condensing
MTBF (calculations) 40,000 hrs
Table 2. DA1222AT Mechanical
ELECTRICAL DA1222AT
Input Video Signals
Analog Signal
1.5V p-p max
Impedance 75 Ohms
Input Sync Signals
Horizontal, Vertical, & C-Sync
TTL(+/-)
Sync on Green -0.3V
Impedance 10 k Ohms
Output Video Signals
Analog Signal
Gain of 1.05 (+/-5%)
Fall/Rise Time (ns) 1.0
Impedance 75 Ohms
Output Sync Signals
Composite Sync
TTL(+/-)
Sync on Green -0.3V
Impedance 22 Ohms
Frequency Compatibility
Horizontal
15-200 kHz
Vertical 47-180 Hz
Typical Video Bandwidth 500 MHz @ -3dB
Minimum Video Bandwidth 350 MHz @ -3dB
Cable Equalization 3 dB @ 120 MHz
Coupling DC
Cross-talk -40dB @ 10 MHz
Power
Internal Power Adapter
90-140/200-240 V
Power Consumption 10 watts max
Table 3. DA1222AT Electrical