Audiovox CDM-9150X - Manual (Page 53)

53
123-456-7890
E-mail Menu
10V
To Replay Registered Voice
1. Press
Rcl
to recall the
number from the phone-
book.
2. Press
F
, scroll to “Re-
play” and press
F
again.
3. You will hear the registered name.
Note: Addresses with voice are marked with “V”.
Voice Activated Dialing
Example: To dial the number by speaking “Katie”.
1. Press and hold
.
2. Listen to the phone say “Name, please”, then
speak into the microphone “Katie”.
3. You will hear from the phone, “Calling Katie”.
4. Katie’s number in the phonebook will be auto-
matically dialed.
Notes: 1. If you hear “Did you say ‘Katie’ ?”, please answer
to it “Yes” or “No”.
2. When you use this feature through car kit option, it
is recommended that you speak slightly louder for
better recognition.
To Add Voice to Stored Numbers
1. Press
Rcl
to recall the number from the phone-
book.
2. Press
F
, scroll to “Modify” and press
F
again.
3. Press the key under STO four times.
4. You will have on the screen “Voice Data Entry”.
5. Press
F
and go to the step 4 of Voice Regis-
tration on page 52.
Note: In case dual numbers or linked numbers are stored in
the phonebook, the primary number or the first num-
ber can be dialed using VAD.
To Delete Registered Voice
1. Press
Rcl
to recall the number from the phone-
book.
2. Press
F
, scroll to “Erase” and press
F
again.
3. Scroll to “Voice Data” and press
F
.
4. You will have on the screen “Voice Data Erase?”.
Scroll to “Yes” and press
F
.