Audiovox CDM-9150X - Manual (Page 75)

75
Volume and Tone Controls
Ringer Volume Control (F31)
This feature allows you to adjust the ringer/melody vol-
ume. The following adjustment will also change the vol-
ume of the Clock Alarm alert and the Countdown
Timer alert.
1. Press
F
3
DEF
1 .
2. Keep pressing or
until you get the desired
sound level, or “Silent”
mode.
Note: In Silent alert mode, ringer tone is not given for an
incoming call. However, if Automatic Answering feature
is ON, ringer tone is given with the lowest available
volume.
Ringer Type Selection (F32)
This feature permits you to select a ringer tone pattern
from 15 options including melody ringers.
1. Press
F
3
DEF
2
ABC
.
2. Press or to select
the ringer tone.
3. Press
F
to set.
Key Tone Volume Control (F33)
1. Press
F
3
DEF
3
DEF
.
2. Keep pressing or
until you achieve the de-
sired sound level, or “Si-
lent” mode.
Note: Key tone will be off in Silent mode, but tone will be
heard on the other side of the line.
Sending DTMF (F34)
This feature allows you to activate or deactivate Send-
ing DTMF (Touch Tone™) when you enter a number
during a call.
1. Press
F
3
DEF
4
GHI
.
2. Scroll to “On” or “Off” to se-
lect.
3. Press
F
to set.
Ring Volume
OK
Ringer Type F32
Ringer 01
Ringer 02
Key Volume
OK
DTMF Send F34
On
Off