Teledyne 316RA / RB / RAD / RBD - Oxygen analyzers - Manual (Page 6)

TELEDYNE ANALYTICAL INSTRUMENTS
2
Model 316RA/RB/RAD/RBD Trace Oxygen Analyzer
Features
Maintenance-Free Sensor. Teledyne’s Micro-Fuel Cell oxygen
sensor is a sealed electrochemical transducer with no electrolyte to change
or electrodes to clean. When the cell reaches the end of its useful life (6
months minimum), simply remove and replace.
Temperature Compensation. The Series 316 includes a built-in
temperature compensation circuit for greater accuracy.
Meter Readout. The Series 316 is equipped with an accurate (± 0.5%
linearity) panel meter which gives direct readout of the analysis. A linear
100-division scale or digital panel meter gives reliable, accurate readout of
the analysis at any point on the scale.
Output Signal. For applications requiring a continuous recording of
the sample oxygen, a linear output signal from 0-1 mVDC to 0-1 VDC is
available at no extra charge.
Multiple Ranges of Analysis. The Series 316 provides 4 standard
ranges of analysis: 0-10, 0-100, 0-1,000 ppm, 0-10,000 ppm, plus a CAL
range, which allows instrument calibration using air.
Speed of Response. Fast upscale response is a key feature of the
Series 316. On the 0-1,000 and 0-10,000 ppm ranges, 90% response time is
less than 10 seconds (at constant temperature).
Compact Packaging. The Series 316 includes an integral throttle
valve, flowmeter, and shutoff valve in a package that uses little more than
10" × 10" of panel space. Access to the major components of the system is
gained by opening the front panel door of the instrument case. The micro-
fuel cell manifold assembly mounts within the interior, permitting cell
replacement without the use of tools.
Panel or Bulkhead Mounting. Two standard versions of the Series
316 Series are available. A panel mounted enclosure houses the Model
316RA, and a wall mounted bulkhead enclosure houses the Model 316RB.
Both versions share the same features and performance.
Optional Features
Current Output Signal. Grounded or isolated outputs (i.e., 4-20
mADC, 1-5 mADC, 10-15 mADC) can be included in the Series 316 for
interface to external devices, such as computers, recorders, etc.
Integral Alarm Circuitry. The Series 316 provides independently
adjustable control circuits for one or two alarms. The alarms are fully
adjustable throughout the scale using the front panel controls.