Teledyne 3010TA - Split architecture trace oxygen analyzer - Manual (Page 14)

1-2: Part I
1 Introduction Model 3010 TA
Figure 1-1: Front of Unmounted Control Unit
Function Keys: Six touch-sensitive membrane switches are used to
change the specific function performed by the analyzer:
• Analyze Perform analysis for oxygen content of a sample gas.
• System Perform system-related tasks (described in detail in
chapter 4, Operation.).
• Span Span calibrate the analyzer.
• Zero Zero calibrate the analyzer.
• Alarms Set the alarm setpoints and attributes.
• Range Set up the 3 user definable ranges for the instrument.
Data Entry Keys: Six touch-sensitive membrane switches are used to
input data to the instrument via the alphanumeric VFD display:
• Left & Right Arrows Select between functions currently
displayed on the VFD screen.
• Up & Down Arrows Increment or decrement values of
functions currently displayed.
F unction B uttons
3010T
OXYGEN A
NALYZER
Standby Switch
Teledyne Ana
lytical Instrum
ents
Digital Meter
Alphanumeric
Display
Data Entry Buttons
Door Latch