Teledyne 4040 - Methane / Nonmethane analyzer User Manual
Page 49
Operation
Teledyne
Analytical
Instruments
49
12. TIMING: Low level application specific timing parameters.
Factory set. Do not change these.
13. STANDBY: Removes power to outputs and displays, but
maintains power to internal circuitry.
Any function can be selected at anytime. Just scroll through the
MAIN MENU
with the DOWN/UP keys to the appropriate function, and
ENTER it. The analyzer will immediately start that function, unless
password restrictions have been assigned. (Password assignment is
explained in Section 4.6.10).
4.5.2 Expanded menus
An exhaustive list of menu messages is provided as follows.
AUTOCAL
-----------------------
AS:7d12h
AUTO SPAN Disabled
Span in 7 days
Span in 12 hours
-----------------------
PASSWORD
-----------------------
Enter
Password
'T' 'A' 'I'
-----------------------
GAIN
ADJUST
-----------------------
GAIN
1
-----------------------
-----------------------
Password
Incorrect
Change
Password
-----------------------
-----------------------
Enter
New
Password
'T'
'A'
'I'
-----------------------
-----------------------