Teledyne 7120 - NDIR analyzer - Manual (Page 16)

2 Installation Model 7120
2-8
Teledyne Analytical Instruments
concentration is below threshold).
• Can be configured as failsafe or nonfailsafe.
• Can be configured as latching or nonlatching.
• Can be configured out (defeated).
System Alarm: Actuates when DC power supplied to circuits is
unacceptable in one or more parameters. Permanently
configured as failsafe and latching. Cannot be de-
feated. Actuates if self test fails.
(Reset by pressing button to remove power. Then
press again and any other button EXCEPT
System
to resume .
Further detail can be found in chapter 4, section 4-5.concentration is
below threshold).
• Can be configured as failsafe or nonfailsafe.
• Can be configured as latching or nonlatching.
• Can be configured out (defeated).
System Alarm:
Actuates when DC power supplied to circuits is
unacceptable in one or more parameters. Permanently
configured as failsafe and latching. Cannot be de-
feated. Actuates if self test fails.
(Reset by pressing button to remove power. Then
press again and any other button EXCEPT
System
to resume .
Further detail can be found in chapter 4, section 4-5.