Teledyne GC-Pro/TCD - Gas Chromatograph - Manual (Page 9)

GC-Pro TCD
Teledyne Analytical Instruments ix
3.3.2.3 50-Pin Equipment Interface Connector 20
3.3.2.4 Analog Output 20
3.3.2.5 Alarm Relays 22
3.3.2.6 Digital Remote Cal Inputs 24
3.3.2.7 ‘Measure Once’ (or one shot measurement)
contacts 25
3.3.2.9 Pin Out Table 25
3.3.2.10 RS-232 Port 28
3.3.3 Gas Connections 29
3.3.3.1 Effluent 31
3.3.3.2 Sensor Vent 31
3.3.3.3 Carrier Gas Connection 31
3.3.4 Sample and Span Gas Connections 31
3.4 Placing the System in Operation 32
Operation ..................................................................................... 33
4.1 Equipment 34
4.2 Preliminary Power-Off Check List 34
4.3 Powering Up the Unit 35
4.4 Activating the Support Gases 38
4.4.1 Carrier Gas 38
4.4.2 Span Gas 38
4.5 Analyzer Operation 38
4.5.1 Default Parameters 39
4.5.2 The HOME Screen 40
4.5.3 The MENU Screen 41
4.5.4 Standby 42
4.5.5 Overlay Chromatogram 44
4.5.6 Timing 46
4.5.6.1 TCD Amplifier Gain 50
4.5.7 Temperature 50