Teledyne SnackO2 - Food package analyzer - Manual (Page 17)

Teledyne Analytical Instruments
17
Analyzer does not
function in the Ext.
Power switch position.
•
Ensure the power
supply is plugged into
the External Power
receptacle or the
external battery is
plugged into the
External Battery
receptacle.
•
Ensure there is power
to power supply.
Batteries do not charge.
•
Ensure the power
supply is plugged into
the External Power
receptacle.
Batteries do not hold a
charge for more than a
few minutes.
•
Replace batteries.
O
2
reading appears to be
incorrect.
•
Recalibrate the sensor.
•
Sensor may need to be
replaced.
O
2
reading does not
appear on the display in
the Program Menu.
•
Cycle the SAMPLE
pump on and then off
then return to the
Program Menu.
Technical Support / Accessories
For technical assistance, please contact Teledyne Analytical Instruments.
Accessories & Recommended Spare Parts
•
Carrying Case w/ shoulder strap
•
External Battery Pack (includes carrying case)
•
Oxygen Sensor (UFO-130)
•
Replacement Filters
•
Side Draw Needles
•
Sample Probe Kit (needle, filter, tubing, and connector)
•
Replacement Batteries
•
Septum