Electronics International FP-5L - Manual (Page 12)

F. (FP-5L Only) Check the FP-5L display to read a number when the "F. to D." (Fuel to Destination) button
is pushed. You may have to fly the aircraft before the GPS unit will output data. If the "F. to D." function is
not working properly, use the following chart to help find your problem.
10
FP-5L
Display Comments
Off The FP-5L is not receiving serial
data. Check Connections and the setup
of the Loran/GPS unit.
' on
(note the bar)
The FP-5L is receiving serial data but
it does not have the proper protocol.
Check connections the Loran/GPS
Interface settings on the FP-5L.
on The FP-5L is receiving RS-232 data but
the Speed and/or Distance data is
missing. Check the setup of the
Loran/GPS unit.
G. After running the engine, check the fuel hoses, transducers and fittings for leaks.
16. Initial Proramming:
The Power-Up Programmable Settings for the FP-5(L) must be set up for your aircraft. See the Power-
Up Programmable Setting section in the Operating Instruction manual for set up information.
Rev. I: 7/2/02