Elite Screens ChromaFlux (Standard) - Manual (Page 10)

www.elitescreens.com/chromaflux
- 8 -
II. Sprayed-related Instructions
(continued)
I. Put on protective gear: gloves, mask, and long-sleeve clothing.
J. Open the paint, and, using the paint stirring stick, stir the paint for 3-5 minutes.
(If there is a separation of the paint and its pigment, there is no need to worry as this is
normal. Stirring will greatly reduce the amount of separation.)
K. If this is your first time using ChromaFlux, we recommend that you take the time to
become familiar with the equipment and paint. Find a scrap piece of cardboard or
plywood and test to learn the consistency of the paint.
L. Spray the paint within the masked off area.
(Refer to the spray gun and compressor’s user manuals to determine its proper method of
usage)
M. After 30 minutes, remove the painters tape.
(In order to avoid the deterioration of the painters tape, do not wait longer than 8 hours
to remove.)
N. Paint will take 12 hours to dry completely; however, the solvents will take 3-5 days to set in
a ventilated environment.
O. After completion, discard any newspaper, film or cardboard used to shield furniture, walls,
or appliances.
P. If there is leftover paint after the project, pour it back into the can and close tightly. Keep
this away from excess heat and sources of ignition. This can be used for repair within the
next 6 months.