Emtech Electronics BLU-KD - Manual

BLU-KD Remote Control
BLU-KD Wiring Instructions
Mic 3/Aux Output Pinouts
3-pin Euro Block
1. -
2. +
3. Shield
1 2 3
- + Shield
The BLU-KD is a 3-input (3-mic or 2-mic & 1-transformer
balanced stereo to mono line input) remote control for BSS Audio
London Series Digital Signal Processors. It is built on a 19” 2RU
steel panel. It is designed to be used with the existing wiring in a
cultural hall with a 19” tilt out box on the wall. On the backside of
the control, there is a 10-pin euro-style connector for connecting the
BLU-KD to the DSP, and a 3-pin Euro-block for the audio signal
from either Mic 3 or the Aux Inputs to the DSP.
10-pin Euro Block
1.Power Button
(CCA pin 1)
2.Volume 1
(CCA pin 2)
3.Ref Voltage
(CCA pin 3)
4.Pwr Button LED
(CCA pin 6)
5.A/M Button
(CCB pin 1)
6.Volume 2
(CCB pin 2)
7.Volume 3
(CCB pin 5)
8.A/M Button LED
(CCB pin 6)
9.GND
(CCA pin 7)
10.GND
(CCA pin 8)