FEC AFC1200 User Manual
Page 4
)(& ,QF
2.3
ISA Main Controller Unit Specifications
w CPU:
80486-DX4 32-Bit Microprocessor
(486DX4, 100 MHz, IBM-Compatible)
w KEYBOARD:
Pendant Type, 20 Keys
w MONITOR:
Standard: VGA Interface
Optional: Liquid Crystal Display (LCD)
w DATA Communication:
RS232C Output CH1
RS232C Input CH2
RS422 Port (Option)
Centronics
Parallel Port
w PRINTER:
DOT matrix
COLOR GRAPHIC
EPSON FX TYPE
HP PAINTJET
EPSON VP TYPE
w FLOPPY DISK Drive:
FDD
3.5" 1.44MB
w HARD DISK DRIVE:
IDE Interface (size varies dependent upon availability)
w Power Source:
200~230 VAC ±10%, 50/60 Hz
w Power Consumption:
140 Watts
w Input Current:
below 0.7A
w In-Rush Current:
below 50A
w Fastening Control Methods:
Torque method
Angle method
Adaptive Yield method
w Torque rate calculation:
point-to-point method, Maximum 3 areas
integrated method, Maximum 3 Areas
w Fastening sequence Steps:
Maximum 32 steps
w Fastening preset:
Maximum 8 types
w Fastening sequence:
Maximum 8 selectionS
w spindle Quantity:
Maximum 24 spindles per ISA Main Controller
w group Synchronization:
Maximum 24 groups
w powerhead synchronization:
Maximum 4 heads
NOTE: Several ISA Main Controller Units may be linked together to provide a fastening capacity of
more than 24 spindles.
Chapter 2: Specifications
Page 2-4