FEC AFC1100 User Manual
Page 3
)(& ,QF
8.1.4 Axis unit
The Axis unit requires careful use and handling. Inspect each Axis unit and ensure the
following requirements are met:
{ The environmental conditions are within specifications.
{ There is no dust, oil, or foreign matter on the unit.
{ The unit is securely mounted, with appropriate clearance on all sides.
{ All screws (for the cover of the unit and for mounting) are correctly tightened.
{ The input power remains within specifications at all times.
{ The unit is not producing any abnormal (excessive) heat.
{ Unit cables are securely fastened and without damage.
8.1.5 Air Handling Units (Air Conditioner, Heat Exchanger, etc.)
Equipment supporting the AFC1100 System's environment must be sufficiently maintained.
Verify support equipment meets the following requirements, as applicable to the unit type:
{ The unit is free from dust, oil, and foreign matter.
{ All filtration devices are clean, and no replacements are required.
{ The unit is securely and correctly mounted.
{ The input power remains within specifications at all times.
{ All fans are functioning properly with no abnormal sound or vibration.
Chapter 8: Maintenance and Inspection (Rev. 8/98)
Page 8-3