Direct Lift PP8S - Manual (Page 8)

8
OPTIONAL CASTER KIT
1. Install caster wheels to caster frames as shown.
NOTE: Hitch Pin and Hairpin Clip will be used to attach casters to lift in following steps. DO NOT Install at this
time.
1. Raise lift 2' - 3' high.
2. Place caster assemblies under crossbeams as shown. Secure with Hitchpin and Hairpin Clip.
3. Lower lift and the columns will automatically raise off the floor.
M10 x 1-3/8” Bolt
Ø10 Flat Washer
Hairpin Clip
Hitch Pin
Ø10 Flat Washer
Ø10 Lock Washer
M10 Nut
Column
Crossbeam
Lower Lift and weight of crossbeam
will automatically raise columns off
the ground.
Caster
Hitch Pin &
Hairpin Clip