Direct Lift Drop Tail Motorcycle Lift - Manual (Page 4)

4
The Owner/Employer:
• Shall ensure that lift operators are qualified and that they are trained in
the safe use and operation of the lift using the manufacturer’s operating
instructions; ALI/SM01-1, ALI Lifting it Right safety manual; ALI/ST-90
ALI Safety Tips card; ANSI/ALI ALOIM-2000, American National Standard
for Automotive Lifts-Safety Requirements for Operation, Inspection and
Maintenance; ALI/WL Series, ALI Uniform Warning Label Decals/Placards;
and in the case of frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/
Quick Reference Guide for Frame Engaging Lifts.
• Shall establish procedures to periodically inspect the lift in accordance with
the lift manufacturer’s instructions or ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer Shall ensure that lift
inspectors are qualified and that they are adequately trained in the inspection
of the lift.
• Shall establish procedures to periodically maintain the lift in accordance
with the lift manufacturer’s instructions or ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance; and The Employer Shall ensure that lift
maintenance personnel are qualified and that they are adequately trained in
the maintenance of the lift.
• Shall maintain the periodic inspection and maintenance records
recommended by the manufacturer or ANSI/ALI ALOIM-2000, American
National Standard for Automotive Lifts-Safety Requirements for Operation,
Inspection and Maintenance.
• Shall display the lift manufacturer’s operating instructions; ALI/SM 93-1,
ALI Lifting it Right safety manual; ALI/ST-90 ALI Safety Tips card; ANSI/
ALI ALOIM-2000, American National Standard for Automotive Lifts-Safety
Requirements for Operation, Inspection and Maintenance; and in the case of
frame engaging lifts, ALI/LP-GUIDE, Vehicle Lifting Points/Quick Reference
Guide for Frame Engaging Lifts; in a conspicuous location in the lift area
convenient to the operator.
• Shall provide necessary lockout/tagout means for energy sources per ANSI
Z244.1-1982 (R1993), Safety Requirements for the Lockout/Tagout of Energy
Sources, before beginning any lift repairs.
• Shall not modify the lift in any manner without the prior written consent of the
manufacturer.