Warning, Vehicle, Electric spreaders models m40 – Earthway M40ECM 12-Volt Professional Broadcast Spreader User Manual

Page 2

Advertising
background image

Electric Spreaders

Models M40

ECM

Always wear protective clothing, eye wear, and dust mask to prevent contact with chemicals and other

materials being applied with this machine.

Remove any material in the hopper before lifting or detaching this machine from the vehicle.

Care must be taken when lifting this machine so as not to cause personal injury or equipment damage.

Never attempt to install this machine to the vehicle alone. Recruit the help of someone to assist when

attaching and detaching this machine from the vehicle.

Refer to the material packaging or the Material Safety Data Sheet for precautionary measures required when

handling materials to be applied.

Before attaching this machine, consideration must be given to the load capacity of the vehicle. Refer to

the owner’s manual of the vehicle for rated load capacity. Be sure to take into account the weight of this

machine is 30lbs. and the weight of the material to be placed in the hopper when calculating the total load

WARNING

KEEP HANDS AWAY FROM ANY SPINNING OBJECT, SHUT-OFF PLATE, SHUT-OFF MECHANISM LINKAGE, AND

THE INSIDE OF THE HOPPER, EXTREME INJURY CAN OCCUR.

HOW TO OPERATE SAFELY:

Read, understand, and follow all product label information provided on the material being applied.

The Setting Rate is adjusted on the ECM on the rear of the spreader see page 4 for details.

MOUNTING INSTRUCTIONS:

Position the M40ECM on the vehicle so that the vertical center frame

brace is positioned at the edge of the vehicle, this will allow a full 180

degree spread pattern.

Shown below is a cross-bed mounting frame, and on the front of a ZTR.

Connect only the black wire (ground) to the negative (-) post on the

battery. Connect the other two wires to the positive (+) post on the

battery.

Mounting Bracket

~|~

you make to custom

fit your vehicle

VEHICLE

®

EV-N-SPRED

Ear

t hW

ay

®

EV-N-SPRED

EarthWay

Forward Mount Point

Vehicle

4.5”

11.4cm

4”

10.2cm

C L

O S E

D

O P E N

Turn

1 1

1 0 9

8

7 6

5 4 3

2 1 0

Advertising