Fairbanks Aegis Xtreme-Duty Floor Scale - Manual (Page 17)

Section 3: Scale Installation
11/08 17 51206 Rev. 1
3.2.3. Positioning Steps
1. Position the Scale into its final location.
2. Place the hooks of the straps or chains into the specific lifting points of the Scale.
─ The straps or chains should be long enough to form a minimum 45° angle
with the platform while lifting.
3. Place the platform in the desired location.
─ The platform should be made stable and level.
─ Shims are not included with the platform and must be supplied locally as
needed.
To lift and move the Platform, place strap hooks into brackets
on each side of it, and also into each hole of the ramp.