Fairbanks Aegis Heavy Capacity PLF-6200-HQ Series - Manual (Page 11)

• Make sure the conduit for the scale cable is in place and secured into the
frame opening
• Pour the concrete around and under the frame ensuring a smooth and level
finish
• If a drain is required, form the pit (using the drawing in Appendix III) to place a
slope in the pit floor to the drain.
• Cure to a minimum of 2000 psi before cutting wire.
• Pull the cable through the conduit before placing the scale platform in the
frame
• Level the platform before installing the instrumentation
50637 / SJ4799 11 08/02 Issue 2
2 x 4 Wire
Frame
Assy
Drain
477a
Pit