Fairbanks 4000 SERIES Pallet Weigh - Manual (Page 14)

05/12 14 51285 Rev. 1
Section 4: Operation
4.1. PROPER OPERATION
The following describes the proper manner of operating the Pallet Weigh pallet jack
scale.
For accurate weights, do not weigh on a grade greater than 2
degrees.
Use the pallet jack scale on a smooth surface. Irregular
surfaces may cause damage the scale and inaccurate weights.
Do not load the scale greater than the rated capacity
otherwise the scale can be damaged.
Do not lift loads by the end of the forks only as this could
damage the scale weighing mechanisms.
4.2. FRONT PANEL LAYOUT