Fairbanks 6020 Titan Series - Manual (Page 16)

A. Parts List
Part No. Description
75458 1 1/8" - x 4 1/2" w/ nut (module - module)
54788 1 1/8" lock washer (module - module)
54255 1 1/8" flat washer (module - module)
80955 Load Cell Base Plate
61743 Clamp Bar Washer (base plates)
62857 5/8" x 6" Anchor Bolts
55010 Ground Rod Kit
B. Load Cells and Load Cell Hardware
Part No. Description
80453 Load Cell, 6" RC, 100K, 1000 ohm, 2mv/v
73682 Shim, receiver cup, 1/16"
64338 Shim, receiver cup, 1/8"
64334 Shim, receiver cup, 3/16"
72274 "O" Ring, INSIDE of Cup, ANSI #222
64340 "O" Ring, OUTSIDE of Cup ANSI #228
70511 Receiver Cup, LOWER (w/ anti-rotation pin)
70512 Receiver Cup, UPPER
64382 Roll Pin, 1/2" x 2½" anti-rotation, baseplate
63981 Anti-Rotation Pin, LOWER Receiver Cup 3/8" x 2 ½"
71717 Locating Tool 5½"
Section 6: Parts
"O" RING
LOAD CELL
CABLE HANGER
(INSIDE FACE
OF SCALE)
CABLE HOLES
BASE PLATE
FOR INITIAL INSTALLATION
USE (1) 1/8" SHIM
UPPER L.C. RECEIVER
CUP, ITEM #5
CUP, ITEM #4
LOWER L.C. RECEIVER
6" LOAD CELL
ITEM # 3
Load cell assembly detail
50753 16 12/12 -- Issue 5