Fairbanks 9111 Omnicell - Manual (Page 8)

50767 8 01/08 Rev. 2
Figure 1
2-directional bumper module
Figure 5 Figure 9
Figure 2 Figure 6
Figure 7 Figure 3
Figure 8 Figure 4
1. Each individual "2-directional bumper module" can be installed rotated 180 around it’s loading point. 2. For scales with 3 modules, distances to center of gravity should be chosen with ratio 1:2, as shown in figure 1, which gives even load distribution. 3. For best stability, the loading points of the modules should be as far from one another as the scale structure allows.
gravity Center of
Load carrier symbol
2 x
120
L L
50767-2