AT&T TL74258 - Manual (Page 66)

Message counter displays
The message counter usually displays the total
number of answering system messages. See the
table below for other message counter displays.
Message counter displays
0 No messages.
0 (flashing) The clock needs to be set (page 51).
1-99 Total number of messages and memos,
or message number currently playing.
1-99 (flashing) Total number of messages and memos.
The number flashes when there are new
(un-reviewed) messages.
After a power failure, the number in the
message counter will flash to indicate
the clock needs to be set.
10-99 Current remote access code while
setting (page 57).
1-99 (counting) Elapsed time while recording a memo
(page 60) or announcement up to 90
seconds (page 53).
99 (flashing) A memo recording is more than 99
seconds.
F (flashing) Memory is full. Messages must be
deleted before new messages can be
recorded.
-- System is answering a call, being
accessed remotely, or the clock is being
set.
-- (flashing) System is being setup, initialized or
messages are being deleted.
02, 04, 06, tS Displayed while setting the number of
rings (page 56).
1-8 Displayed for two seconds while
telephone base speaker volume is being
adjusted.
Message counter
Answering system operation
61
MSG #
- -
BASE
MSG #
1