Gentec-EO THZ-D - Manual (Page 11)

11
Revision 1.1
THZ-D Series Instruction Manual
Gentec Electro-Optics Inc. All rights reserved
3.1.2 THZ12D
Or
Figure 2.2: THZ12D with monitor
Refer to the user manual of each monitor for further information.
3.1.3 General Instructions
1- Place the detector on its optical stand (Must use a delrin post).
2- Connect the detector to a compatible Gentec-EO laser power monitor (see Fig. 2-1).
(Refer to specifications)
NOTE: The parameters programmed in the DB- 15 “Smart Interface” are for a 1 M 
load
impedance.