Ransburg Turbodisk Applicator Assembly A11376 - Manual (Page 54)

Turbodisk Applicator - Parts Identification
49
3
Use as required to increase fluid pressure at regulator outlet to approx. 5-20 psi
Pressue Change Across Tubing (PSI)
≈ .601 X 10 6 X Flow Rate (mi/min) X Viscosity (Poise) X Fluid Length (in)
[Tube ID (in)] 4
Item #
70990-09 TURBODISK ASSEMBLY, TRIGGER VALVE ONLY
W/DR-1 REGULATOR - PARTS LIST (Cont.) (Figure 11)
Part # Description Qty Notes
4-18 LSFI0007-01 Elbow, Male, SS 1
4-19 SSF-8125 Hex Jam Nut 1
4-20 LSMM0025-00 Bracket, Regulator 1
4-21 LSFI0018-01 Ferrule, Kit (Not Shown) 1
4-22 LN-9223-00.9 DR-1 Fluid Regulator Service Manual (Not Shown) 1
4-23 KK-4841 Repair Kit, CCV-403-SS (Not Shown) 1
4-24 LN-9100-00 CCV-302-SS Service Manual 1
4-25 CCV-7 Valve Tool (Not Shown) 1
4-26 55994-23 Tubing, .156" ID X .253" OD 5'
4-27 55994-24 Tubing, 1/4" OD X 1/8" ID 5'
4-28 7787-02 Adapter, 1/4" NPSF to NPTF, Carbon Steel 1
4-29 70589-05 Fitting, Paint, .250" Dia. 1
4-30 8212-32F Screw, Cap, Hex Socket, #10-32 2
These parts are supplied with Kit 70975-09 Trigger Valve Kit
3
3
AA-07-02.1