Ransburg Turbodisk Applicator Assembly A11376 - Manual (Page 62)

Turbodisk Applicator - Parts Identification
57
3
Use as required to increase fluid pressure at regulator outlet to approx. 5-20 psi
Pressue Change Across Tubing (PSI)
≈ .601 X 10 6 X Flow Rate (mi/min) X Viscosity (Poise) X Fluid Length (in)
[Tube ID (in)] 4
Item #
70990-11 TURBODISK ASSEMBLY, DUAL DR-1 REGULATORS - PARTS LIST (Cont.)
(Figure 13)
Part # Description Qty Notes
4-21 LSFI0018-01 Ferrule Kit (Not Shown) 2
4-22 LN-9223-00.9 DR-1 Fluid Regulator Service Manual (Not Shown) 1
4-23 KK-4841 Repair Kit, CCV-403-SS (Not Shown) 1
4-24 LN-9100-00 CCV-403-SS Service Manual (Not Shown) 1
4-25 CCV-7 Valve Tool (Not Shown) 1
4-26 55994-23 Tubing, .156" IDX .253" OD 10'
4-27 55994-24 Tubing, 1/4" OD X 1/8" ID 10'
4-28 7787-02 Adapter, 1/4" NPSF to NPTF, Carbon Steel 2
4-29 70589-05 Fitting, Paint, .250" Dia. 2
4-30 8212-32F Screw, Cap, Hex Socket, #10-32 4
These parts are supplied with Kit 70975-11 Trigger Valve Kit
3
3
AA-07-02.1