Ransburg DR-1 Fluid Regulator 74151 - Manual (Page 13)

DR-1 Fluid Regulator - Maintenance
10
3. With a screwdriver, remove Item 16 (screw) from
the diaphragm assembly.
4. Separate Item 6 (lower diaphragm retainer), Item
10 (o-ring), Item 8 (lower diaphragm), Item 17 (bleed
spacer), Item 14 (center diaphragm), and Item 5 (up-
per diaphragm retainer).
5. With the 7/8" and the 15/16" open-end
wrenches, remove Item 13 (retaining plug), Item 12
(spring,) and Item 11 (regulating needle) from Item
3 (lower housing).
6. Remove Item 11 (regulating seat) and Item 10
(o-ring) from the lower housing assembly.
7. Clean all metal parts with suitable cleaning solvent.
DO NOT use solvent on the diaphragms or o-rings.
> Care MUST be taken while cleaning the
coated parts of the regulator to prevent
scratching.
C A U T I O N
!
NOTES
LN-9223-00.10