Ransburg DR-1 Fluid Regulator 74151 - Manual (Page 8)

INTRODUCTION
DR-1 Fluid Regulator - Introduction
5
SPECIFICATIONS
Air Pressures: Variable by Control
(Manual or Automatic)
100 psi (7 bar max.)
Fluid Input: 300 psi (20.7 bar max.)
(10 psi minimum above
output pressure)
Fluid Output: Variable by Ratio
Pneumatic / Fluid Connections
Air Pilot: #10-32 Thread
(Low & High)
Fluid In: 1/4-inch NPSM Thread
Fluid Out: 1/8-inch NPSM Thread
3/16-inch OD Tubing, use 70589-04 Fitting
1/4-inch OD Tubing, use 70589-05 Fitting
3/8-inch OD Tubing, use 70589-10 Fitting
6mm OD Tubing, use 70589-06 Fitting
8mm OD Tubing, use 70589-11 Fitting
3/8-inch NPSM Hose Connection, use
70589-12 Fitting
Volume of Paint Held
Within Regulator: 5 cc
Mechanical
Height: 1-7/8-inch (48mm)
Height W/Fittings: 2-1/8-inch (54mm)
Diameter: 2-3/4-inch (70mm)
Diameter W/Fittings: 3-3/8-inch (86mm)
Environmental / Physical
FEATURES
• Two independently controlled flow pressure
ranges.
• High flow range port for higher fluid deliveries.
• Low flow range for more precise control over
lower fluid deliveries.
• Interchangeable low flow ratios (1:1, 1:2, 1:3,
1:4, 1:6, 1:8, 1:10) for precise control.
• Stainless steel and coated wetted parts
for decreased color change time.
LN-9223-00.10