Rivers Edge RE619 LumberJack Extrme User Manual

Page 11

Advertising
background image

Check for parts online at

www.huntriversedge.com or call 800-450-EDGE (3343) M-F 8-5

11

Operator's Manual

Rivers Edge One-Man Ladder Stands

ASSEMBlY INSTRuCTIONS (RE619)

Tools needed – two 7/16" wrenches, rubber mallet
iMpoRtant aSSEMblY tip: do not tighten any nut and bolt combinations

completely until all parts are assembled together! Finger tighten plus one

turn of a wrench only! this will temporarily hold the lock nut on the bolt while

helping alignment of all parts! after all parts are assembled together, all nut

& bolt combinations must be completely tightened.

1. Attach the foot platform (1ML37) to the inside of side rails (SL61) using (2)

provided 1/4-20 x 2-1/4” bolts and locknuts. SEE fIGuRE 1. DO NOT tighten

all nut & bolt assemblies completely!

notE: Mesh surface should be on top with squared ends of platform closest

to side rails.

2. Attach the rear (blade end) of tree blade frame (1ML34) to the inside of side

rails, and the (2) armrests (AR12) to the outside of side rails using (2) provided

1/4-20 x 3-1/4” bolts, locknuts and steel washers. SEE fIGuRE 2.

3. Attach the front end of tree blade frame to the side rails and the front end

of armrests to the side rails using (4) provided 1/4-20 x 2-1/4” bolts, lock

nuts and (2) steel washers. SEE fIGuRE 2.

4. Attach the seat frame (1ML15) to the tabs on the tree blade frame using (2)

provided 1/4-20 x 1-1/2” bolts, locknuts, steel washers and nylon washers.

SEE fIGuRE 3. Attach the (2) provided rubber bumper stops to the top side

of tree blade frame by pressing into provided holes. SEE fIGuRE 3.

notE: Mesh surface of seat frame should be on top.

notE: nylon washers should be placed between the tabs and seat frame

to prevent noise.

Figure 1

Figure 2

Figure 3

cutout view

of foot platform

1/4-20 x 2-1/4”

bolts

locknuts

side rails

1/4-20 x 2-1/4” bolts

armrest

locknuts

locknuts

tree blade frame

seat frame

1/4-20 x 1-1/2” bolts

rubber bumpers

tabs

nylon washers

steel washers

tree blade frame

side rails

shooting rail

mounts

steel washers

1/4-20 x 3-1/4” bolts

steel washers

Advertising