Safety precautions cont’d – Robinair 16009 DiscovR R134a Refrigerant Identifier User Manual

Page 4

Advertising
background image

© 2007 Robinair

2

Operate this unit with R-134a refrigerant only. Cross-

contamination with other refrigerant types causes

severe damage to the A/C system, to service tools,

and equipment. Do NOT attempt to adapt the unit for

another refrigerant. Do NOT mix refrigerant types

through a system or in the same container.

Do not breathe refrigerant and lubricant vapor or

mist. Exposure may irritate eyes, nose, and throat.

Use recycling equipment certified to meet SAE

J2788 requirements to remove refrigerant from the

A/C system. If accidental system discharge occurs,

immediately ventilate the work area. There must be

adequate ventilation in the vehicle servicing area.

When testing vehicle air conditioning systems, the

vehicle ignition must be turned OFF. This action

prevents EMI / RFI problems, as well as eliminates

potential user hazards from moving parts of the vehicle.

Wear eye and skin protection when working with

refrigerants. Escaping refrigerant vapors can freeze

upon contact. Do NOT direct refrigerant escaping from

the sample hose toward exposed skin or toward the face.

Connection to power sources greater than 14V DC

could cause “out-of-warranty” damage. Connection to

a battery which is not fully charged, or is smaller than a

typical vehicle battery, may cause errors in reading.

To reduce the risk of battery explosion due to spark

generation : First connect the RED clip to the positive

12-volt battery terminal; then connect the BLACK clip to

a metal ground location away from the battery.

Safety Precautions cont’d

Advertising