Salamander Designs SN/PM/A - Manual (Page 5)

Post Cap & Wire Managers
7.
A. Using the 4 plastic fasteners (S) attach the post cap (T). B. Attach the wire managers (F) by snapping
them into the backside of the post.
Salamander Designs Ltd. www.salamanderdesigns.com 800-535-5659
© 2012 Salamander Designs Ltd. Doc No. 500-885 / v10.12 / 5 of 5
S
T
Squeeze to remove.
F
CAUTION
:
Tilt Flat
CAUTION
:
6
.
Place TV onto Post Bracket
NOTE: Two people needed for this step.
Pick-up the TV and guide the pins from the interface bracket (B) onto the post bracket (C) receptacles as shown in Diagram A
(TV may be positioned flat or tilted approximately 7 degrees). Secure the TV in place using the 2 button head screws (Q) with
the hex key (V) at both ends of the post bracket.
Diagram A
Q
V