AT&T 135 - Manual (Page 5)

4
R e d i a l
The telephone always stores in memory the last number
dialed. To dial the same number again, press
.
The redial memory can accept numbers up to 24 digits long.
The number will remain in memory until you change it by
dialing another telephone number.
For privacy, you can erase the redial memory. Lift the hand-
set, then press any digit (1-9).
F l a s h
Press instead of pressing the switchhook to activate
customer calling services such as call waiting or three-way
calling. You may have to press other buttons before or after
as explained in custom calling instructions provided
by your local telephone company.
Ringer Volume
The RINGER volume switch allows you to adjust the
loudness of the telephone ringer from OFF to HI. Slide the
switch to the desired volume level.
Volume Buttons
The VOLUME button adjusts the handset during your call.
While on a call, press to increase volume, t o
decrease volume.
(Turn over for more Operation,
Memory and In Case of Difficulty)
O P E R AT I O N
Dial Mode
This telephone has a selectable push-button dial and will
work with either tone or rotary telephone service. It can
be set to work directly with long distance or certain other
services that require tone signaling including some tone
activated computer systems.
AT&T 135 Quark pdf 7/22/98 11:26 AM Page 5