AT&T 135 User Manual
Page 7
6
M E M O RY
( c o n t i n u e d )
Directory Card: Remove the directory card. Write your
telephone number in the space provided. Also write the tele-
phone numbers (or names) that you want to store in each
memory location. Reinstall the card and clear plastic cover.
Speed Dialing
To program numbers into memory:
1 . Press
.
2 . Enter telephone number. You will hear a click when
each button is pressed.
3 . Press
.
4. Enter a digit (1-9) for the memory location where the
number is to be stored.
5 . Hang up after the number is entered correctly.
Repeat steps 1-5 to store another number.
To dial:
1 . Listen for dial tone.
2 . Press
.
3 . Press memory location (1-9).
Memory Erase
To erase any number from memory, you can enter another
number in the same location.
N O T E : Numbers programmed into a memory location
might not be retained if the telephone has been
unplugged from the line jack for a half hour or more.
AT&T 135 Quark pdf 7/22/98 11:26 AM Page 7