Securitron TJ-68 - Manual

Securitron Magnalock Corp. www.securitron.com
ASSA ABLOY, the global leader
Tel 800.624.5625 [email protected]
in door opening solutions
© Copyright, 2011, all rights reserved PN# 500-19900
Page 1 Rev. F, 04/11
INSTALLATION INSTRUCTIONS FOR TJ-38 & 68 TOP JAM KIT
Inswinging Door Configuration Lock Mount Kit
For Model M38 and M68 Magnalocks
1. DESCRIPTION
Securitron’s TJ-38 & 68 Top Jam Kits are bracket accessory kits that provide the necessary
hardware required for the inswinging door mount configuration for the Model M38 or M68
Magnalocks. Each kit is used to mount either an M38 or M68 on the secure side of a door that
swings into a secured area. The kit includes a TJ-Bracket to mount the lock at or above the door
frame (header), a Z-Bracket for mounting the strike to the door, and a Dress Cover to conceal
the assembly and provide an attractive finished appearance.
2. PRODUCT OVERVIEW
Upon unpacking, an inventory should be made
to ensure that all the required components and
hardware have been included. Along with
these instructions, the Top Jam Kit package
should contain the following items:
This manual will address in detail the
installation of an M38 or M68 on an inswinging
door using the TJ-38 or TJ-68 Top Jam Kit.
The following illustration shows the basic
mounting arrangement (TJ-38 shown):
INCLUDED HARDWARE:
6X Item #1 6X Item #2 6X Item #3
Phillips Flat Head
#12 X 1-1/2” Type “A”
Phillips Flat Head
#14 X 4” Type “A”
Phillips Flat Head
1/4-20 X 1-1/2”
6X Item #4 2X Item #5 1X Item #6
Blind Nut
1/4-20
Slotted Hex Head
#14 X 1-1/4” Type “A”
Socket Head Cap
5/16-18 X 1-1/2”
TJ-Bracket
Dress Cover
Hardware
Z-Bracket