Securitron STK-1 - Manual (Page 2)

PN# 500-21000
Page 2 Rev. C, 08/11
Screw new tabs to MUNL. Flip MUNL
unit over and place into strike
cutout, making sure that unit is
slid to bottom of filed cutout.
Mark new mounting holes using the
tabs holes as a template. Remove
tabs from MUNL, drill and
countersink new holes in frame.
Mount tabs inside frame using screws
furnished in the STK-1, do not
tighten down completely.
Position MUNL over new tabs and
tighten screws from MUNL into tabs.
Use spacers provided as necessary to
have the MUNL level with surface of
the frame. Then finally tighten the
screws in the frame for final
positioning.