Securitron TCP User Manual
Page 2
Advertising
PN# 500-17900
Page 2
Rev. D, 06/11
Note also that you will employ the blind nuts furnished with the TSB-3 with the short, flat
head cap screws furnished with the TCP to mount the plates to the door (assuming you can’t use
pre-existing tapped holes). The TSB-3 comes with a tool to collapse the blind nuts in the door
(refer to the TSB-3 instructions for this point.)
FIG 2: TOUCH SENSE BAR/TCP PLATE ASSEMBLY DRAWING
1/4-20 X 2 1/4" MACHINE
SCREWS (SUPPLIED WITH
TSB-3 BAR)
TOUCH SENSE BAR
1/4-20 X 3/4" MACHINE
SCREW (TWO PLACES)
CLEARANCE HOLES NEEDED
INTO DOOR BEHIND THESE
HOLES
BLIND NUTS REQUIRE 3/8"
DIAMETER HOLES IN DOOR
TCP
Advertising