SecurityMan IPcam-SD - User manual - Manual (Page 24)

20
2. To record video files to your computer, click “System”, and then click “PC
Config”.
3. In “PC Config” window under “Base Config”, the default directory are C:\
Program Files\CMS\Record(Picture) folders, click “Browse” to choose a
different destination folder. Next, select the “Record Setting” and make sure
“Overwrite” is checked and then select the disk/partition you want save the
video/picture files as illustrated below. Click “Apply” or “OK” to confirm the
changes, and click to go back to main CMS screen.
4. To start recording, right-click on camera image and choose “Local record” as
illustrated below.