SecurityMan IPcam-SD - User manual - Manual (Page 49)

45
• • • DEVICE DISCONNECT
The DEVICE DISCONNECT tab located on the Alarm Setting tab consists of 3
settings that are used to configure how the CMS will operate whenever your
camera is disconnected. These settings are:
A. Device List – used to select which device you want to configure.
B. Alarm Sound – enables/disables audible alert notification.
C. Sound File Path – used to specify the location of the sound file you want
to use.
NOTE: Please remember to click the “APPLY” button located at the bottom
of each tab to save your changes and click on the “ X” located at the top right
corner of the screen exit.
DEVICE LIST
The DEVICE LIST displays all the devices (IPcam-SD) that are configurable by
the CMS and currently established connection.
ALARM SOUND
The ALARM SOUND enables/disables the audible alert that can be heard from
your computer whenever the IP camera is disconnected from the network or the
power is unplugged from the camera.
NOTE: A 20 to 30 seconds delay notification is normal for a device disconnection
alarm.