Sonnet Technologies Aria extreme CardBus and PCI Card Windows - Manual (Page 36)

28
2. From the Type list, select the required authentication type. (You should use the same
authentication method as used by your target wireless network.)
•
Open Key: If your target wireless network uses Open Key, your authentication
request will be always accepted.
•
Shared Key: If your target wireless network uses Shared Key, your Aria extreme
must be set to use correct WEP key to pass the authentication. If selected, your Aria
extreme must use identical WEP keys as the target wireless network.
3. Choose Alphanumeric or Hexadecimal as the key format, and then enter up to four
keys in the provide fields. When using Hexadecimal format, only digits 0–9 and letters
a–f, A–F are allowed. Make sure to enter the characters matching the required key
format and length as below:
ASCII characters Hexadecimal digits
64 bits 5 alphanumeric characters 10 hexadecimal digits
128 bits 13 alphanumeric characters 26 hexadecimal digits