Sonnet Technologies Tempo Trio PCI Adapter Combo Card (Mac) - Manual (Page 7)

7
FireWire and USB Driver Installation Steps
Mac OS 9.1.x (Upgrade from Lower Mac OS Version)
Complete these steps only when upgrading your system to Mac OS 9.1 from a
lower Mac OS version; FireWire and USB driver software will be installed auto-
matically. Please note, if your system has built-in USB and FireWire ports, you may
skip these steps; your installation is complete.
1. Insert the Mac OS 9.1 CD into your computer’s CD-ROM drive. In the
fi nder menu, select Special: Restart, then immediately press and hold
down the C key on your keyboard until your system restarts and the
Welcome to Mac OS screen appears.
2. Double-click the Mac OS Install application icon. In the Select Destination
window, click the Options button and click the Perform Clean Installation
check box that appears in the subsequent screen. Click the Select but-
ton. Proceed through the next several screens until you reach the Install
Software window. Click OK, Start, then Continue, and complete the
installation. After the software is installed, quit the Mac OS Install applica-
tion and restart your computer from the hard drive where Mac OS 9.1 is
installed; your installation is complete.
Mac OS 9.0.x (Existing Installation)
If Mac OS 9.0.x is installed in your computer, you must download and install
the appropriate FireWire and USB driver software. Please note, if your system has
built-in USB and FireWire ports, you may skip these steps; your installation is complete.
1. Turn on your computer.
2. Log on to the Internet and type in www.sonnettech.com/support/tempotrio.
Locate and click on the link for FireWire and USB drivers, read the infor-
mation on the page, then click on each link to download both drivers.
3. Install the drivers, then restart your computer from the hard drive where
Mac OS 9 is installed; your installation is complete.
Mac OS 9 (Upgrade from Lower Mac OS Version)
Complete these steps only when upgrading your system to Mac OS 9.0 from a
lower Mac OS version.
1. Insert the Mac OS 9 CD into your computer’s CD-ROM drive. In the fi nd-
er menu, select Special: Restart, then immediately press and hold down the
C key on your keyboard until your system restarts and the Welcome to Mac
OS screen appears.
2. Double-click the Mac OS Install application icon. In the Select Destination
window, click the Options button and click the Perform Clean Installation
check box that appears in the subsequent screen. Click the Select button.
Proceed through the next several screens until you reach the Install Software
window. Click OK, Start, then Continue, and complete the installation. After
the software is installed, quit the Mac OS Install application and restart your
computer from the hard drive where Mac OS 9 is installed.
3. Log on to the Internet and type in www.sonnettech.com/support/tempotrio.
Locate and click on the link for FireWire and USB drivers, read the infor-
mation on the page, then click on each link to download both drivers.
4. Install the drivers, then restart your computer from the hard drive where
Mac OS 9 is installed; your installation is complete.