Harrington Hoists and Cranes ED 1050 Supplement - (ED3) - Manual (Page 8)

8
3.0 Pre-operational Procedures
3.2.1 Chain
3.2.1 The quantity and location of the chain components including Cushion Rubbers, Washers and Stopper
Assemblies is shown in
Table 3-2 , and Figure 3-2 . Ensure that all chain components are in the correct
location and properly installed. Never operate the hoist with incorrect, missing or damaged chain
components.
Table 3-2 Chain Stopper Placement
Capacity Code Load Side No Load Side
S & DS Adjacent to bottom yoke Last link
Figure 3-2 Chain Component Arrangement for the ED1050